Thanks for purchasing from us!  You'll find all the pressing instructions for our transfers here.  Any questions, feel free to contact us! :) 

 

THIN MATTE CLEAR FILM SCREENPRINTS

Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 325°F
Pressure: Heavy  (if print doesn't stick, this is likely the biggest reason why.  Make sure your press is on heavy pressure!)
Time: 15-20 Seconds
Peel: Hot
Do not cover with any Teflon etc.  If print needs an additional press, please use parchment paper over it. 

*Please note the time and temp are suggested and you may have to adjust based on your own presses best settings.

All clear film transfers come ready to press and are easy to apply.  Simply lay the transfer on your shirt and press.  No teflon sheet needed!  We do recommend using a heat press; however, an easy press works too.  A household iron will not work. These transfers can be pressed on any color garment and have been pressed on canvases and wooden rounds as well.  Please wait 48-72 hours to wash & dry (they can go in the dryer or be hung to dry).   Wash inside out and avoid fabric softeners.   

ONE COLOR SCREENPRINTS

Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 325-350°F
Pressure: Heavy
Time: 7 Seconds
Peel: Hot

GLOW IN THE DARK SCREENPRINTS

Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 305-325°F
Pressure: Heavy  (if print doesn't stick, this is likely the biggest reason why.  Make sure your press is on heavy pressure!)
Time: 10 Seconds
Peel: Hot
Do not cover with any Teflon etc.

These prints need to be charged by light.  If you find they are not glowing after awhile, simply put in light and recharge them.  Quick recharge by putting under a lamp or led light source.  

PUFF PRINT ONE COLOR

Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 310 - 325°F
Pressure: Heavy 
Time: 7-10 Seconds
Peel: Hot
Do not cover with any Teflon etc.  If print needs an additional press, please use parchment paper over it. 

UV DTF WRAPS & DECALS

Application Instructions

1. Peel design transfer off of backing.

2. Place the transfer on the cup ensuring design is straight and positioned correctly.

(The adhesive is very strong. Once the transfer touches the glass its impossible to take off)

3. Press the transfer down, working from the center outwards, pushing out any bubbles.

4. Rub all over the design with your fingers.  The more rubbing the better.

5. Peel clear film off and you're done!

Hand wash only.  We do not advise to put in dishwasher or microwave.

We are not responsible for application mishaps.

*Please note:  Not all brands of 16 oz. glass cups have the exact same measurements. They can differ by a couple of millimeters. Our wraps have been measured to fit Libbey glass cans. Adjustments may be necessary*

By purchasing you agree that the process for the application of our transfers is your responsibility and we do not refund due to user error.  Please remember that all heat presses are different.

Please contact us at chanell0519@gmail.com if you have any questions.  Thank you!!